Product ID:SAVIN PRISM I YELLOW COLOR DEVELOPER, 8231
MSDS Date:07/19/1989
FSC:6850
NIIN:00N017213
MSDS Number: BKSFQ

SAVIN CORP.

9 WEST BROAD STREET
STAMFORD, CT 06904-2270
US

Emergency Phone: 301-921-8503

Info Phone: 301-921-8503

Cage: 29382

SAVIN CORP.

12070 STAMFORD, CT 06904-2270 US

Telephone: 203-967-5000

Cage: 29382

POLYESTER RESIN

STYRENE-ACRYLIC RESIN

ORGANIC PIGMENT

POLYPROPLYLENE WAX

IRON POWDER. PEL AND TLV AS IRON OXIDE.

OSHA PEL 10MG(FE)/M3 TDUST

ACGIH TLV: 5MG(FE)/M3 FUME

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES AND SKIN: NON-IRRITANT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MINIMAL IRRITATION TO RESPIRATORY TRACT MAY
OCCUR AS WITH EXPOSURE TO LARGE AMOUNT OF ANY NON-TOXIC POWDER.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN RESPIRATORY
SYSTEM.

First Aid:INHAL: REMOVE TO FRESH AIR, CONSULT MD IF SYMPTOMS PERSIST.
EYES: IN CASE OF CONTACT, IMMED FLUSH EYES WITH COPIOUS QUANTITIES
OF WATER FOR AT LEAST 15 MINUTES. INGEST: CALL MD IMMEDIATELY .

Extinguishing Media:PLENTY OF WATER, FOAM, CO*2, DRY POWDER,
EXTINGUISHERS.
Fire Fighting Procedures:THIS MATL WILL BURN IN CASE OF FIRE. AVOID
INHALATION OF SMOKE. WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NO INFORMATION AVAILABLE.

Spill Release Procedures:SWEEP UP OR CLEAN UP WITH VACUUM CLEANER (USE
GROUNDED VACUUM CLENER).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS ARE
NEEDED FOR SAFETY REASONS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:CONSULT LOCAL/SAFETY HEALTH AUTHORITIES IF ADDITIONAL
GUIDANCE IS NECESSARY.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:2800F,1538C
Spec Gravity:7
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS POWDER.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CO, CO*2, NO*X,& PHENOL DERIVATIVES
WHEN HEATED AT HIGH TEMPERATURES (>300C).

Waste Disposal Methods:LANDFILL OR INCENERATE IN COMPLIANCE WITH
FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.